Discover our operating tables for a range of theatre and specialist imaging requirements, supported by Lab-Med’s UK-based team.

ET500T
Electric operating table for general surgical use, with powered positioning and a sliding tabletop.
At a glance
Electric positioning
Longitudinal slide
Hand control and override panel
Technical specifications
- Safe working load: 250 kg
- Table length: at least 2,100 mm
- Table width: 550 mm
- Lowest tabletop height: 700 mm or less
- Height adjustment: 300 mm
- Longitudinal slide: up to 350 mm

ET800
Electro-hydraulic operating table with a modular tabletop for a range of surgical specialties.
At a glance
Electro-hydraulic positioning
Modular tabletop
Hand control and override panel
Technical specifications
- Table load limits vary with configuration and position; contact Lab-Med for details.
- Manufacturer’s operating manual states that patient and accessory weight must be less than 350 kg when using accessories.
- Table length: at least 2,100 mm
- Table width: 550 ± 20 mm, excluding side rails
- Lowest tabletop height: 550 ± 50 mm, excluding X-ray board
- Height adjustment: at least 500 mm
- Longitudinal slide: at least 350 mm

HE-608-A
Electro-hydraulic general-purpose operating table with a T-shaped base and flexible positioning.
At a glance
Electro-hydraulic positioning
T-shaped base
Carbon-fibre tabletop option
Technical specifications
- Maximum patient weight: 350 kg; lower limits apply depending on configuration and position.
- Tabletop length: 2,000 mm
- Tabletop width: 500 mm; 560 mm including side rails
- Height: 700–1,000 mm, excluding mattress
- Longitudinal movement: 300 mm
- Forward and reverse tilt: at least 30°
- Lateral tilt: at least 20°
- For patients over 150 kg, the supplied manual specifies consultation for adjustment in advance.

HE-608-S
Specialist electro-hydraulic table designed for imaging and interventional procedures.
At a glance
Specialist imaging applications
Powered positioning
Tabletop translation
Technical specifications
- Length: at least 2,450 mm
- Width: at least 530 mm
- Height: 680–1,180 mm; 500 mm lift
- Longitudinal translation: at least 320 mm; lateral translation: at least 200 mm
- Combined patient and accessory weight: up to 350 kg with the tabletop translated towards the head; up to 230 kg when translated towards the foot. Positioning restrictions apply.

HE-608-P
Specialist operating table for spinal procedures, with configuration options to support different clinical requirements.
Technical specifications
- Maximum combined patient and accessory weight: 350 kg in normal position; 230 kg with head and leg plates interchanged
- Position and tilt restrictions apply; consult the operating manual.
- Electro-hydraulic positioning and interchangeable sections
Contact our team to discuss your clinical requirements, configurations, quotations and ongoing support.